Frequently Asked Questions

No.Not under any circumstances.

Nylon Roller Pumps should only be used for water transfer, or light spot spraying. They must be flushed out after each use, & the internal housing & rollers must be stored in an oil bath.(Gear or Engine oil)

 Spotpaks are supplied with:

• 8000 series 12v Shurflo Pump, model 361-8000 - Made in the USA.                        
• On/off switch
• 6mtrs of 8mm ID chemical resistant delivery hose
• High Quality Spotjet spray pistol with 600mm Stainless Steel Lance and an adjustable nozzle.
• For easy connection to your 12 volt power source we have also included a 3mtr wiring loom with Alligator clips and in line fuse for protection.                                                                                                           
• For filtration purposes we have supplied an inline suction filter.                                                                                                        
• The flow capacity is 6.8L/m and 60psi maximum pressure.                                                                       
• 12 month warranty.

It is supplied so it can attached the delivery hose to the on/off switch bracket. This allows the hose not to be pulled too hard and breaking the delivery elbow.

• Both the Utepak and Trukpak sprayers are supplied with 6 mtrs of 10mm ID chemical resistant hose, PA series High Quality spray gun with 500mm extension lance with flat fan nozzle.
• The U.V Stabilized Polytuff Tank has in built carry handles and inserts in the bottom for mounting, spill proof lid plus basket and Drain assembly.                                                                                                                                
• Utepak pump options: Shurflo 8000 series 6.8L/Min 60psi and 2088 series 11.3L/Min 45psi.                                                                             
• Trukpak pump options: Shurflo 8000 series 6.8L/Min 60psi, 8000 series 6.4L/Min 100psi and 2088 series 11.3.L/Min 45psi.     
• Trukpak factory fitted options: RP1-24-3 pressure regulator and M99-75 Boomless nozzle

• Both the Utepak and Trukpak sprayers are supplied with 6 mtrs of 10mm ID chemical resistant hose, PA series High Quality spray gun with 500mm extension lance with flat fan nozzle.
• The U.V Stabilized Polytuff Tank has in built carry handles and inserts in the bottom for mounting, spill proof lid plus basket and Drain assembly.                                                                                                                                
• Utepak pump options: Shurflo 8000 series 6.8L/Min 60psi and 2088 series 11.3L/Min 45psi.                                                                             
• Trukpak pump options: Shurflo 8000 series 6.8L/Min 60psi, 8000 series 6.4L/Min 100psi and 2088 series 11.3.L/Min 45psi.     
• Trukpak factory fitted options: RP1-24-3 pressure regulator and M99-75 Boomless nozzle

Generally a 20, 50 or 70 Litre spray tanks will be ok, BUT                                                                                       

Warning- Refer to Vehicle or ATV manufacturer’s instructions for appropriate load and towing limits and fitting positions. Never fill the spray tank capacity to exceed the vehicle or ATV manufacturer’s specified safe load carrying capacities. Note: 1 Litre of water = 1kg.

No. Not under any circumstances

• For AG chemicals, the standard Santoprene valves are suitable for most applications.                            
• For special applications, different Viton valves & diaphragms may be required.                                   
• Whenever selecting a pump, you should always refer to a chemical compatibility chart (refer to Silvan customer service on 1300 SILVAN) to match the chemical to be used with your pump.                                                                                                                                                   
• Selecta now distribute a Shurflo pump that is fully Viton equipped (Diaphragm & Valves) model 361-.8000-342-136.

•  When agitation is required to direct the flow of liquid back into the tank.                                                                               
• When control of the flow and pressure is required, ie: boom spraying and adjusting pressure for the right application through a spray pistol.                                                                                                              
• Important- suitable to use only on pumps providing more than 5.3L/Min open flow.

The 12v Stripperdomes are fitted with a constant pressure valve (2bar) to stop pump pulsations affecting spray pattern.

The PTO model has a standard non-drip valve. (These parts are not interchangeable)

It reduces the cycling pulsation and increases pump life.  The accumulator tank also assists in controlling and maintaining constant pressure.

The Silvan Polytuff Red Tanks are suitable for all Ag Chemicals & water. The tanks are U.V. Stabilized and are made from food grade Polyethylene.  They are available from 14Ltr to 2200Ltr Capacities.   Never, under any circumstances enter the tank.

Warning- Refer to Vehicle or tractor manufacturer’s instructions for appropriate load and towing limits and fitting positions. Never fill the spray tank capacity to exceed the vehicle or tractor manufacturer’s specified safe load carrying capacities. Note: 1 Litre of water = 1kg.

The Silvan Polytuff Grey Tanks are suitable for Diesel. The tanks are U.V. Stabilized and are made from a specific Polyethylene for Diesel storage.  They are available from 100Ltr to 2200Ltr Capacities.                                                                                                                                                                             

Warning- Refer to Vehicle or tractor manufacturer’s instructions for appropriate load and towing limits and fitting positions. Never fill the spray tank capacity to exceed the vehicle or tractor manufacturer’s specified safe load carrying capacities. Note: 1 Litre of Diesel  = approx 0.86Kg 

Baffling reduces the surge of fluids inside the tank.

• UV Stabilized Poly Tank specifically designed to store and transfer Diesel.                                                                                                                             
• A High Quality self priming Vane pump, Auto shut off gun with stainless steel swivel adaptor, 4mtrs of 19mm ID delivery hose, 4mtr wiring loom with Alligator clips and an internal suction filter.                       
• Standard flow rate of 40L/Min with optional higher flow capacity pumps on Larger Tank models. Ie:800,1000 and 2200Ltr.
• Our new X1 and X2 models are all supplied Standard with a High Quality Piusi self priming Vane pump capable of 45L/Min open flow.
• 5mtrs of 19mm ID Diesel Transfer hose, Auto shut off gun with Stainless Steel swivel adaptor, 4mtr wiring loom with Alligator clips and internal suction filter.
• Lockable trigger models Standard on all Low profile models.
• Some models have lockable filling lids and earth straps.
• See the range on our website for your tank of choice.

• New to the Diesepak range is the 200ltr Low Profile model SQDN200L-X1. 
• The Tank is fitted with brass female inserts in the bottom specifically designed for tray mounting.  
• All other Dieselpaks including the 800ltr can be mounted by Heavy Duty ratchet straps.
• For the 1000Ltr capacity Dieselpak we have a 033-999-KIT Available for Bolting the Tanks with Moulded Legs to a suitable tray or Deck,                
• NOTE: Also available are steel forkable mounting frames, product code 430-113 or 430-114.

Warning- Refer to Vehicle or tractor manufacturer’s instructions for appropriate load and towing limits and fitting positions. Never fill the Dieselpak tank capacity to exceed the vehicle or tractor manufacturer’s specified safe load carrying capacities. Note: 1 Litre of Diesel =.approx 0.86Kg

Yes, only Two models though the PF12 and PF14 are suitable for Gravity feed

No certainly not. Auto shut off guns require a minimum 30psi pressure to open.

Yes, a maximum of 15mtrs of hose before excessive wear on the pump is created and a large amount of open flow capacity is decreased.

All Diesel Pumps have a 30 minute duty cycle under normal conditions.                                                    

30 minutes on and 30 minutes off and include an Internal Bypass in the Head of the pump that can protect the pump and motor from excessive wear and tear ( Always ensure that you have read and understood the pumps operation manual)

Yes, all Dieselpaks can be fitted with a Litre counter. The PF11 (K24) can be fitted inline to any tank size within the Dieselpak range with hosetails to connect the counter to the desired ID of hose.                                      

Mechanical litre counter kits ie 515040-1 and 515040-2 are also available and can be fitted to Dieselpaks from 300ltr to 800Ltr capacity.

Contact customer service on 1300 SILVAN (1300 745 826) for the kit to suit your application.

No certainly not. The units are not designed for any other purpose but to store and transfer Diesel.

No certainly not. The Selecta Power Transfer pumps are only designed for water. Not any chemicals or Flammable liquids

Recommended Oil type is Multigrade SAE 20W/50.                         

Nylon Roller Pumps should only be used for water transfer, or light spot spraying. They must be flushed out after each use, & the internal housing & rollers must be stored in an oil bath.(Gear or Engine oil)

A. In order to reach the working position, the raised machine (transport position), was lowered onto the material to shred
Remedy = Make the machine get to its working position before shredding

A. Working position too low, blades or rams are touching the ground
Remedy = Adjust the height of the rotor with respect to the ground

A. Blades or rams worn or broken
Remedy = Replace worn-out or broken parts.

B. Blades or rams locked by pins
Remedy = Clean and grease pins

C. Rotor balancing not correct
Remedy = Check the weight of the blade or ram units

D. Rotor bearings worn
Remedy = Dismount and replace bearings and seals